ETT HT-SW-2;
特點:割段樣品不損失樣品水分,粒度可以通過篩網控制;
1粉碎室直徑5cm , 固定刀片4片, 旋轉刀1組 (四面)
處理量: 3kg/hr
2粉碎粒度由篩網控制, 一臺附3個粉碎篩 20、40、60 mesh
3粉碎時可連續進料
4粉碎面采玻璃設計, 可清楚觀察粉碎結果,并有馬達過熱安全保護
5粉碎室可正面完全打開, 清理試料及刀片
6粉碎室與主軸一體成形, 使用時低噪音
7切割式刀口設計, 可適用于軔性較大之物品
8無段變速 0~3000rpm
9入料口直徑:15mm
10電源: AC110V 1/4馬力
11尺寸: 21 X 29 X 24 cm
12重量: 約13 kg
13通過ISO9001認證

================

ETT HT-SW-2;
Features: Cut section sample samples without loss of moisture, particle size can be controlled through the screen;
A grinding chamber diameter of 5cm, the fixed blade 4, a rotary blade set (four)
Handling capacity: 3kg/hr
2 Particle Size crushed by the screen control, an attached three smash 20,40,60 mesh sieve
3 crushed to continuous feedstock
4 crushed glass design surface mining, crushing results can be clearly observed, and motor overheat safety protection
5 grinding chamber can be completely open front, cleaning materials and blade test
6 the crushing chamber formed integrally with the spindle, when the low-noise
7 cutting blade type design, applicable to the firmware of the larger items
8 variable speed 0 ~ 3000rpm
9 into the data port diameter: 15mm
10 Power: AC110V 1/4 horse power
11 Size: 21 X 29 X 24 cm
12 Weight: about 13 kg
13 passed ISO9001 certification